Your RC-1616 Remote Control
13
#
Feature
Function
4 Main Switching Module
Provides easy accessibility for service and repair
5 Power Wires
The red wire connects to the “+9V” and the black wire connects to the “GND”
6.2.1
Setting the Dipswitches
You need to set the dipswitches when using more than one
RC-1616
remote
panel. Configure the
RC-1616
unit by setting the dipswitches, as Table 9 and
Table 10 define:
Table 9: Dipswitch Definitions S2-1 to S2-8
DIP
Set as follows:
S2-1
ON for Single bus operation, OFF for “XY” operation
S2-2, S2-3, and S2-4
OFF (not in use)
S2-5, S2-6, S2-7, and S2-8
Select the levels controlled by the panel (see Table 10)
Table 10: Dipswitch Settings (Levels controlled by the Panel)
S2-5
S2-6
S2-7
S2-8
Levels controlled by the Panel
OFF
OFF
OFF
OFF
Not a valid situation
ON
OFF
OFF
OFF
This panel only controls Level 1
1
OFF
ON
OFF
OFF
This panel only controls Level 2
1
OFF
OFF
ON
OFF
This panel only controls Level 3
1
OFF
OFF
OFF
ON
This panel only controls Level 4
1
ON
ON
OFF
OFF
‘Video’ controls Level 1. ‘Audio’ controls Level 2
OFF
ON
ON
OFF
‘Video’ controls Level 2. ‘Audio’ controls Level 3
OFF
OFF
ON
ON
‘Video’ controls Level 3. ‘Audio’ controls Level 4
ON
OFF
ON
OFF
‘Video’ controls Level 1. ‘Audio’ controls Level 3
ON
OFF
OFF
ON
‘Video’ controls Level 1. ‘Audio’ controls Level 4
OFF
ON
OFF
ON
‘Video’ controls Level 2. ‘Audio’ controls Level 4
ON
ON
ON
OFF
‘Video’ controls Level 1 and 2. ‘Audio’ controls Level 3
ON
ON
OFF
ON
‘Video’ controls Level 1 and 2. ‘Audio’ controls Level 4
OFF
ON
ON
ON
‘Video’ controls Level 2. ‘Audio’ controls Level 3 and 4
ON
OFF
ON
ON
‘Video’ controls Level 1. ‘Audio’ controls Level 3 and 4
ON
ON
ON
ON
‘Video’ controls Level 1 and 2. ‘Audio’ controls Level 3 and 4
1 Any ‘Audio’, ‘Video Only’, ‘Audio Only’, ‘AFV’ or separate ‘Audio IN’ buttons in this situation do not function. When a
user wants to designate one of the above levels as audio, the legend in the switch (switches) may be changed accordingly
