background image

 

 
 
 

 

KRAMER ELECTRONICS LTD.                            

14 

LIMITATION OF IMPLIED WARRANTIES 

All implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited 
in duration to the length of this warranty. 

EXCLUSION OF DAMAGES 

Kramer’s liability for any defective products is limited to the repair or replacement of the product at our option. 
Kramer shall not be liable for: 

1)  Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use 

of the product, loss of time, commercial loss; or: 

2)  Any other damages, whether incidental, consequential or otherwise. Some countries may not allow 

limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of 
incidental or consequential damages, so the above limitations and exclusions may not apply to you. 

This warranty gives you specific legal rights, and you may also have other rights, which vary from place to 
place. 
 

 

NOTE

: All products returned to Kramer for service must have prior approval. This may be obtained from your 

dealer. 
 
 

 
 
 

NOTICE 

This equipment has been tested to determine compliance with the requirements of:  
 

EN-50081

"Electromagnetic compatibility (EMC); 
generic emission standard. 
Part 1: Residential, commercial and light industry" 

EN-50082

"Electromagnetic compatibility (EMC) generic immunity standard. Part 1: 
Residential, commercial and light industry environment". 

CFR-47

  

FCC Rules and Regulations:  

Part 15- “Radio frequency devices: 

Subpart B- Unintentional radiators 

 

CAUTION 

 

Servicing of the above mentioned machines is only allowed to a Kramer authorized technician or 
Engineer.  Any user who makes changes or modifications to the unit without the express approval of the 
manufacturer will void user authority to operate the equipment. 

 

Use the DC power supply (provided) to supply power to the machine and controllers. 

 

Please use recommended interconnect cables to connect the machine to controllers and other components. 

 

 
 
 
 
 
 
 

Содержание PT-102A

















Отзывы: