KRAMER: SIMPLE CREATIVE TECHNOLOGY
Configuring the VP-728 via the OSD MENU Screens
28
8.7 The Setup Screen
Figure 15
and
Table 10
define the Setup screen.
Figure 15: Setup Screen
Table 12: Setup Screen Functions
Setting
Function
Selection/Range
Default
Save
Save a profile
From Profile 1 to Profile 8
Recall
Recall a profile
From Profile 1 to Profile 8
Slideshow
Set speed for slide show (see section
8.7.1
)
Min, Low, Mid, Long, Max, Off Min
Frame Lock
Locks the vertical refresh rate of the output to
that of the input
1,2
On/Off
Off
Auto Image
Automatically adjust and align the picture
each time of the UXGA inputs is selected or if
the UXGA input resolution has changed
Manual, Auto
Manual
Switching Mode Select seamless switching (fade-through-
Black) or Fast switching which is faster but
may cause glitches on the output (applies
when switching between analog inputs)
Seamless, Fast
Seamless
Factory Reset
Reset your
VP-728
to its preset default
settings
Yes/No
Advanced Setup: Open the advanced setups (see
Figure 16
)
Mode Set (see
Table 13
)
OSD (see
Table 14
)
Misc (see
Table 15
)
Input (see
Table 16
)
Output (see
Table 17
)
1 Note that seamless switching is not possible when working in the Frame Lock mode unless all sources are frame
synchronized
2 In cases where the output resolution can support the vertical refresh rate of the input, the output refresh rate will change
according to the input refresh rate
