Kramer Electronics Ltd.
KT
‑
107S
– Upgrading the Firmware
29
Install the RockChip Driver Assistant
If the ‘Rockchip_driverAssistant’ driver is already installed on your PC, skip this section and
proceed to
Prepare the KT
‑
107S for Firmware Upgrade
on page
30
.
If it is not installed or if you are unsure, complete the installation steps in this section.
To install the driver:
1.
In the ‘Rockchip_driverAssistant’ folder, open ‘Driver Assistant’.
2.
Double click ‘DriverInstall.exe’
3. Click
Run
to install
the ‘DriverInstall’ tool on your PC.
Figure 32: Installing the Driver
4. Click
Install Driver
.
The following window appears:
Figure 33: Driver Installation Security Note
5. Click
Install
repeatedly on the next few screens until the driver is successfully installed.
Figure 34: Successful Installation
6. Click
OK
.