Kramer Electronics Ltd.
KT
‑
107S
– Mounting the KT
‑
107S
14
Connecting the flat Cable
The flat cable passes power and PoE-enabled Ethernet to the
Touch Panel
.
To connect the flat cable:
1. On the rear side of the
KT
‑
107S
, unscrew the cover and remove (by slightly pressing
downwards and then pulling out), and set the cover and screw aside.
Figure 11: Removing the Cover on the
KT
‑
107S
Rear Side
2. Attach the panel mount plate, top side up (see arrows),
to the rear of the
KT
‑
107S.
3. Fit the connecting holes
on the
KT
‑
107S
to the screw holes on the panel mount
.
4. Insert the 4 M2x4 screws (supplied) and tighten.
Figure 12: Attaching the Panel Mount Plate to the Rear Side of the
KT
‑
107S