Kramer Electronics Ltd.
KDS-EN7, KDS-DEC7
– Operating and Controlling KDS-EN7
14
3. Press
Enter
to accept output resolution.
Resolution is selected.
Selecting an Encoder Device Channel Number on the decoder
Select the channel number of a specific encoder.
To select an encoder channel number:
1. Press the left or right arrows to access the encoder CH Select menu.
2. Press the up or down arrows to select the first digit (0 to 9).
3. Press left and right arrows to add another digit (0 to 9).
Channel number for the specific encoder is selected.
Operating via Ethernet
This section describes the following actions:
•
Allocating the IP Address via LCD screen menu
•
•
Connecting Ethernet Port Directly to a PC
•
Connecting Ethernet Port via a Network Hub or Switch
•
Allocating the IP Address via LCD screen menu
KDS-EN7
/
KDS-DEC7
IP default static addresses are: 192.168.1.39 for the Encoder and
192.168.1.40 for the Decoder. By default, DHCP is enabled, and assigns an IP address to the
device. If DHCP Server is not available, for example, in case a device is connected directly to
the laptop, that device gets the default IP address. If these IP addresses are already in use,
the system searches for a random unique IP in the range of 192.168.X.Y. the allocated IP
address can be identified using the LCD screen menu.
Setting Channel Number
Each encoder requires a unique channel number, and the connected decoders should be
tuned to that encoder channel. You can set the channel number via the LCD screen menu or
the embedded web pages.
To set the channel number for KDS-EN7/KDS-DEC7, via LCD screen menu:
1. Connect the device to the 24V DC power adapter and connect the adapter to the mains
electricity. The ON LED lights green, and the LINK LED flashes (indicating that no
streaming activity is detected).
2. In the LCD screen menu, go to DEV SETTINGS > CH DEFINE.
