#
Feature
Function
19
RS-232 3-Pin Terminal
Block
Connect to a serial controller or serial controlled device for extending the serial control signal via the
streaming line to control an external device.
20
12V DC Connector
Connect to the power adapter.
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Step 3: Install the KDS-8F
Mount to a flat surface using the attached mounting brackets or attach the rubber feet and place on a flat surface.
•
Ensure that the environment (e.g., maximum ambient temperature & air flow) is compatible for the device.
•
Avoid uneven mechanical loading.
•
Appropriate consideration of equipment nameplate ratings should be used for avoiding overloading of the circuits.
•
Reliable earthing of rack-mounted equipment should be maintained.
Step 4: Connect the inputs and outputs
Always switch OFF the power on each device before connecting it to your
KDS-8F
. For best results, we recommend that you
always use Kramer high-performance cables to connect AV equipment to
KDS-8F
.
Step 5: Connect the power
Connect the power cord to
KDS-8F
and plug it into the mains electricity.
Safety Instructions (See
for updated safety information)
Caution:
•
For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the terminal or in the User Manual.
•
There are no operator serviceable parts inside the unit.
Warning:
•
Use only the power cord that is supplied with the unit.
•
Disconnect the power and unplug the unit from the wall before installing.
Step 6: Operate the KDS-8F
Change the encoder / decoder mode:
The unit is defined as an encoder by default.
•
Press and hold the + (plus) and – (minus) buttons simultaneously for 10 seconds.
The encoder / decoder mode changes.
Stream Video:
1. Connect a unit in encoder mode and a unit in decoder mode to the same 10G Ethernet switch.
KDS-8F
is plug-and-
play with DHCP enabled.
If DHCP is not available on your network, an APIPA (Automatic Private IP Addressing) address is assigned.
2. Subscribe the decoder to the encoder source using Kramer Network Enterprise Management Platform (go to
www.kramerav.com/product/KDS-8F
HDMI
Media Player
Audio
Amplifier
Audio Source
HDMI
4K Display
IR Controller
IR
Display
Audio
4K Display
HDMI
IR
RS-232
RS-232
PC Controller
KD
S-
8F
a
s
en
co
de
r
KD
S-
8F
a
s d
ec
od
er
10Gbit/s LAN
1G Device
Eth
1G Device
Eth
Tx Rx G
AUDIO
IR OUT
IR IN
RS-232
SERVICE
1GbE LAN
HDMI OUT
HDMI IN
TM
TM
DP IN
SFP+
Fiber
Tx Rx G
AUDIO
IR OUT
IR IN
RS-232
SERVICE
1GbE LAN
HDMI OUT
HDMI IN
TM
TM
DP IN
SFP+
Host
Computer
Ba
ck
USB
KDS-8F
4K SDVoE Fiber Transceiver
POWER T/R SOURCE
LAN VIDEO
Tx
Rx
LINK
MENU
-
+
INFO/ENTER
TM
USB
Camera
Mouse
Keyboard
Fro
nt
USB
USB
USB