KDS-7-MNGR
Quick Start
P/N: 2 9 0 0 - 3 0 1 5 0 5 QS
Rev: 1
Scan for full manual
KDS-7-MNGR Quick Start Guide
This guide helps you install and use your
KDS-7-MNGR
for the first time.
Go to
www.kramerav.com/downloads/KDS-7-MNGR
to download the latest user manual and check if
firmware upgrades are available.
Step 1: Check
what’s in the box
KDS-7-MNGR
4K AVoIP
Manager
1 Quick start guide
2 Bracket sets
Step 2: Get to know your KDS-7-MNGR
#
Feature
Function
1
USB Type A Charging
Ports
Connect to a keyboard and mouse to
control the units via UI using a display connected to the unit
via HDMI output port
.
2
LCD Display
Use for device information and configuration.
3
Menu Navigation
Button
Press to return to the previous menu.
Press to move up to the next configuration parameter.
Press to go to the next menu.
Press to move down to the next configuration parameter.
Enter
Press to accept changes.
4
LINK LED
See
LED Functionality.
5
NET LED
See
LED Functionality
.
6
ON LED
See
LED Functionality
.
7
24V DC Port
Plug the 24V DC power adapter into the unit and connect it to an AC wall outlet for power. (Optional,
not required if the unit is powered via PoE).
8
RESET Recessed Button
Press and hold for about 20 seconds, until all LEDs flash, to reset the device to its factory default
values..
9
LAN Port
Connect directly, or through a network switch, to your PC/ laptop to control the unit via WebGUI/Telnet.
10 HDMI OUT Port
Connect to a display to control the unit directly.
LED Functionality
KDS-7-MNGR
LEDs function as follows:
LED
Color
Definition
LINK LED
Lights Green
A link is established between
KDS-7-MNGR
and the TV and is transmitting A/V
signals.
NET LED
Off
No IP address is acquired.
Lights green
A valid IP address has been acquired.
Flashes Green very fast (for 60sec)
A device identification command is sent (Flag me).
Lights Yellow
Device falls back to default IP address.
Lights Red
Security is blocking IP access.
ON LED
Flashes Red
On
fallback address acquiring, device ‘ON’ LED flashes continuously in slow
0.5/10sec cadence
Lights Green
When power is on.
Flashes Green Slowly
Device is in standby mode.
Flashes green fast
FW is downloaded in the background.
Flashes Green very fast (for 60sec)
A device identification command is sent (Flag me).
Lights Yellow
Device falls back to default IP address
Lights Red
Security is blocking IP access.
Post reboot, all LEDs light for 3 seconds then return to their normal LED display mode.
