56
K-CONFIG - The Driver Manager – Getting Started
Figure 90: Serial Reply Commands – Selecting a Serial Reply Command
3.
Connect the room controller device to your PC.
4.
Click the test command button.
The
Connection Method
window opens.
5.
Click
Connect
.
6.
Click the
Select Port
button, select the relevant serial port and click the
Select Port
button.
7.
Click
Test Command
The reply appears in the command syntax area:
Figure 91: Serial Reply Commands – Reading the Serial Reply Command
8.
Click
Set
.
The Serial Reply was added to the shared Serial Reply>Power list.
Note that a serial reply can be created by testing a serial command and storing the response (see
Section 5.5.1
