K-CONFIG –
The Driver Manager – Getting Started
47
5.5.1
Creating a Serial Device-Specific Command
To add a serial device-specific command
:
1.
In the
Serial
list, select
Device-Specific
and click the
+
icon
The following window appears:
Figure 71: Serial Commands –Add New Command Name
2.
Type the new command name (for example, DVI_IN) and click OK:
Figure 72: Serial Commands – the New Command Name
3.
In the
Driver Manager
window select the new command (DVI_IN):
Figure 73: Serial Commands –Selecting the New Command Name
