Kramer K-CONFIG, Руководство пользователя

Страница: 53 / 188

46 K-CONFIG - The Driver Manager – Getting Started
5. In the same way you can move the content of other Device-Specific commands and fit them into the relevant
command groups:

Select the Device-Specific command name.

Click and hold that command.

Drag the command to the desired command in the shared list.

Click the Action Copy message OK.
Upon completion of this procedure, the "live (with command content)" command groups and commands appear bold
in the list. Commands that are unique to the controlled device remain in the Device-Specific command list, see Figure
69 .
Figure 69: The Driver Manager – Standard Commands Added
5.5 Serial Commands
Select a serial command (Shared or Device-Specific). The following window appears:
Figure 70: Serial Commands
The area on the right shows the command name and command syntax. You can display the syntax as Hex, Decimal or
ASCII. To move a Device-Specific command to the Shared list, see Section 5.4 .
Once the controlled device is connected you can test the command, as described in Section 5.5.1 .