KRAMER: SIMPLE CREATIVE TECHNOLOGY
Technical Specifications
10
5.2 Operating the FC-6801 SDI De-Embedder
To operate the
FC-6801
SDI De-Embedder
:
1. Set the audio delay, via the:
AUDIO DELAY dipswitches (see section 5.1.2); and/or
Windows®-based Kramer control software
1
2. Adjust the gain level of the balanced analog audio outputs, if required, via
the:
GAIN 1-2 knob
2
, and/or the GAIN 3-4 knob
3
; and/or
Windows®-based Kramer control software
1
6 Technical Specifications
Table 5 includes the technical specifications:
Table 5: Technical Specifications
4
of the FC-6801 SDI De-Embedder
INPUT:
1 x SDI with embedded audio on BNC connector
OUTPUTS:
2 x SDI on BNC connectors with EDH
1 x SDI reclocked Loop output
2 x AES-EBU on BNC connectors
4 x balanced audio on XLR connectors
MAX. OUTPUT LEVEL: 7Vpp
BANDWIDTH (-3dB):
20Hz – 20kHz
S/N RATIO:
–90dB
CONTROLS:
Analog audio level control, Delay settings, Group Select
COUPLING:
DC
AUDIO THD + NOISE:
0.014%
AUDIO 2nd HARMONIC: –90dB
POWER SOURCE:
90-260VAC 50-60Hz 18VA
DIMENSIONS:
19 inch (W), 7 inch (D), 1U (H) rack mountable
WEIGHT:
2.5 kg (5.5 lbs) approx.
ACCESSORIES:
Power cord, Null-modem adapter and Windows®-based Kramer control software
5
1 Downloadable from our Web site at http://www.kramerelectronics.com (click “DOS and Windows®-based software drivers
for Kramer machines” in the Technical Support section)
2 Rotate to adjust the gain level of the balanced analog audio outputs 1 and 2
3 Rotate to adjust the gain level of the balanced analog audio outputs 3 and 4
4 Specifications are subject to change without notice
5 Downloadable from our Web site at http://www.kramerelectronics.com (click “DOS and Windows®-based software drivers
for Kramer machines” in the Technical Support section)
