Kramer DIP-31, Руководство пользователя

Страница: 14 / 67

Kramer Electronics Ltd.
DIP-31
– Operating DIP-31
12
Operating DIP-31
The DIP-31 can be operated using any of the following methods:
•
Front panel buttons.
•
Remote contact-closure switch, (see Connecting Remote Control Switches on page 9 ).
•
Web pages, (see Operating DIP-31 Remotely Using Web Pages on page 15 ).
•
Protocol 3000 command, (see Protocol 3000 on page 34 ).
Locking EDID
To lock the EDID and prevent the stored EDID (either default or read from a device) from
being overwritten:
•
Send a Protocol 3000 command, (see Protocol 3000 on page 34 ).
•
Use the Web pages, (see EDID Management Page on page 24 ).
Resetting DIP-31
The DIP-31 can be reset to factory default by either:
•
Using the button on the rear panel.
•
Using the Web pages, (see Device Settings Page on page 18 ).
To perform a soft reset of the DIP-31:
•
Briefly press the Reset button.
The device resets.
To reset the DIP-31 to factory default parameters:
•
Press and hold the Reset button for five seconds.
The device is reset to factory default parameters.
Analog Audio Output Volume Control
The analog audio output volume can be controlled using different methods:
•
Using the Web pages, (see Browsing DIP-31 Web Pages on page 15 ).
•
Using the remote, contact-closure switches connected to pins 3 and 4 of the Remote
terminal block, (see Connecting Remote Control Switches on page 9 ).
•
Using P3000 commands to control the volume (see Audio Commands on page 55 ).
The volume is adjustable from -83dB to +24dB in steps of 0.5dB.