Address Configuration Commands
7
b = Output 2 input selection (0 = OFF)
:
h = Output 8 input selection (0 = OFF)
5.9 ID Commands
The following ID Command formats shall be used:
? <CR> : Report ID / firmware version
Device replies with:
MX88 Core vx.y<CR><LF>
MX88 Panel vx.y<CR><LF>
Parameters:
x = Major firmware revision
y = Minor firmware revision
5.10
Clear Working Preset
This command will turn all outputs off immediately.
C<CR> : Clear working preset
Device replies with:
P0=0,0,0,0,0,0,0,0<CR><LF>
6 Address Configuration Commands
The following Address Configuration Command formats shall be used:
A=<CR> :
Report device hardware address configuration.
Device replies with:
A=xx<CR><LF>
Parameters:
xx = Device address
A=xx<CR> :
Configure device hardware address.
Device replies with:
A=xx<CR><LF>
Parameters:
xx = Hardware Address (“00” – “99”)
1. All commands are “echoed” at the terminal prompt.
2. Any invalid command sequences will return an error prompt / string.
