36
OIO 15en Edition 2020-05
Operating Instructions
Accessories
Appendix
Mounting the junction box
Mounting the junction box on OME 13 - 32
Mounting the junction box on OME 52
Figure shows OME 20 as an example
1. Disconnect the cables of the pick up and the
temperature sensor
1
. Ensure that the cable
length is sufficient.
2. Unplug the connectors of the pick ups
2
.
3. Turn out the hexagon of the pick ups
3
.
4. Place the washers of the junction box
4
over
the pick up inserts
5
.
5. Slide the base plate of the junction box
6
under the washers
4,
screw the hexagon
3
back in.
6. Plug the connectors of the pick ups
2
back in.
1. Dismantle the junction box lid
7
.
2. Screw the box with screws
8
directly onto the
OME 52 in the provided holes
9
.
3. Disconnect the cables of the pick up and the
temperature sensor
1
. Ensure that the cable
length is sufficient.
Connecting the junction box
1. For OME 13 – 32: Dismantle the junction box
lid
7
.
2. Carry out the cabling of the pick up and of the
temperature sensor through the cable glands
10
in the junction box. Observe the
connection circuit diagram, see Fig. 5, page
35.
3. Connect the connecting cable at the box
outlet
11
.
4. Screw tight the box lid
7
.
1
2
4
3
5
1
6
7
8
9
1
8
11
7
10
