Kraken RC KT7708, Руководство пользователя

Страница: 9 / 32

8
KRAKEN VEKTA.5 TSCO TRUCK - KT7708 / RTR MANUAL KRAKEN VEKTA.5 TSCO TRUCK - KT7708 / RTR MANUAL
1
2
1. Center the tires by adjusting the steering trim. Use subtrim if necessary (see your transmitter's instruction manual
for further direction).
If steering is not in the desired neutral position after binding and steering cannot be centered using trim and
subtrim, please follow these tips.
(1). Reset trim and subtrim are set to its neutral factory settings.
(2). Remove the servo horn and reinstall.
(3). Retrim as needed.
2. Make sure your receiver and servo are turned on and check that they are in neutral position. Use the diagram
above as a guide for the position of the throttle/brake horn. Adjust the throttle linkage as needed to ensure that they
are not binding. The brake linkage knob can be adjusted to improve braking conditions. Use your transmitter trim
and subtrims to fine tune the adjustments.
Bench test the vehicle
prior to running it.
Adjust Brake Nut
clockwise until the
car brakes effectively.
ADJUSTING STEERING AND THROTTLE TRIMS