Kraken RC KT7708, Руководство пользователя

Страница: 21 / 32

20
KRAKEN VEKTA.5 TSCO TRUCK - KT7708 / RTR MANUAL KRAKEN VEKTA.5 TSCO TRUCK - KT7708 / RTR MANUAL
1. Remove or loosen the retainer screw.
Locate the jam hole on the other side of the adjusting nut. Use a 4mm driver to secure the nut. (Caution: Do not jam into the
threaded hole where you just removed the screw from!)
2. While the adjusting nut is secured, rotate accordingly to loosen or tighten the slipper assembly.
When done, apply some blue threadlock and screw back in the retainer screw until snug. Be careful not to overtighten as
you may strip it. **Tip: Alternatively, you can remove the entire Spur/Slipper assembly and adjust the nut using a wrench.
1
2
Loosen
Tighten
ADJUSTING THE SLIPPER CLUTCH