INTENDED USAGE OF THE CHARGER
Only use this device to maintenance charge of standard and suitably designed12V/6V batteries which
are sufficiently charged. Do so up to a maximum capacity of 240 Ah and with the following types:
• Maintenance-free lead-acid batteries
• Standard or low-maintenance lead-acid batteries, optional CA-CA technology (warning: only fill up
the water in the battery after charging)
• Gel batteries
• Absorbent glass mat (AGM) batteries
This device is not intended for commercial use. This device should not be used by individuals with re-
duced physical or mental abilities, nor should it be used by children. Faults and damage may arise if
this device is used improperly and the manufacturer shall not assume any liability whatsoever.
TECHNICAL DATA
Model:
136403 Dino KRAFTPAKET maintenance battery charger
Specifications:
6V and 12V max. 750 mA
Function:
maintenance charging output between 13V-14.2V / 6.5V-7.1V
Power supply:
100-240 V, 50 Hz
Charging voltage:
Nominal: 6V or 12V (automatic selection)
Minimum operating voltage:
2 volts
Charging current:
max. 750 mA
Ambient temperature
for device operation:
-10°C – 40°C
Charger type:
maintenance charger (it is not a fully-fledged charger)
Battery types:
6V and 12 V lead-acid batteries, low-maintenance,
maintenance-free, CA-CA, AGM and gel batteries
Recommended battery capacity:
2-240 Ah, only maintenance charging
Protection class:
IP65, protected from jets of water and dust
Protections:
multiple electronical protections against overloading
4
