Instruction Manual
Electric Tile Cutter
www.kraftool.hk
www.kraftool.hk
|
|
3
2
Always
follow these rules
when you are
working
with
the
tile
cutter
:
`
No one, except the personnel
who have
undergone relevant training, authorized to work
with
such machines
and familiar with this manual
are allowed
to work with tile cutter
;
`
during the work it is necessary to use
protective equipment
;
`
working clothes
must
exclude the possibility
of its capture by moving parts of the tile
cutter;
`
long hair should be carefully removed
under a headdress;
`
do not touch the rotating parts while the
tile cutter is running;
`
if the
power
cable
was damaged during
operation
, immediately disconnect the product
from the power supply;
`
plug
/
unplug
the tile cutter to/from the
mains
only when the electric motor is off;
`
use the
tile cutter
only for its intended purpose;
`
All adjustments should be made only when
the product is turned off;
`
use only serviceable and appropriately
sized cutting
blades
;
`
it is forbidden to leave the tile cutter
unattended;
`
It is forbidden to use the tile cutter in the
presence of
any
faults;
`
It is forbidden to work with a loose or defective
cutting blade.
Purpose and scope
Electric tile cutter is designed for cutting all types
of natural and artificial tiles (facing, floor, paving,
etc.), except for asbestos-containing.
Please study the present Manual closely, including
the Appendix Basic Safety Instructions. This is the
only way you can learn how to properly handle the
tool and avoid mistakes and dangerous situations.
The product is intended for use in areas with a
temperate climate with a characteristic temperature
of - 20 ° С to + 40 ° С, relative air humidity no more
than 80%, with no direct exposure to precipitation
or excessive air dustiness.
The product complies with the requirements of
the Technical Regulations of the Customs Union:
`
ТР ТС 004
/
2011
“On the safety of low-voltage
equipment” Art. 4, paragraphs 1-5, 9;
`
ТР ТС 020/2011
"Electromagnetic compatibility of
technical equipment" Art. 4, paragraphs 2, 3.
This Manual contains the most complete information
and requirements necessary and sufficient for
reliable, effective and safe operation of the Product.
In view of further works on improvement of the
Product, the manufacturer reserves the right to
make minor changes in its design not shown in this
Manual, as they do not affect the effective and safe
operation of the Product
The use of the product in industrial volumes,
in conditions of high intensity of work and
super-heavy loads reduces the service life of
the product.
2
5
9
18
4
3
7
1
12
19
11
10
13
Dear customer!
When buying the product
:
`
please demand checking its serviceability by a test run, as well as completeness according
to the delivery contents.
`
please make sure that the warranty card is duly issued and contains the serial number of
the product, the date of sale, the stamp of the store and the signature of the seller.
Before running the product for the first time, please carefully read this manual and strictly follow the
requirements contained therein. This is the only way for you to learn how to properly handle the product
and avoid mistakes and dangerous situations. Please keep this manual for the lifetime of your tool.
Remember!
The product is a source of increased traumatic risk.
ATTENTION
ATTENTION
