34
ВСТРАИВАЕМЫЙ ЭЛЕКТРИЧЕСКИЙ ДУХОВОЙ ШКАФ
BUILT-IN ELECTRIC OVEN
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ • USER GUIDE
eLeCtRICAL ConneCtIon
The oven must be connected to the main electricity grid only by
authorized electricity technicians in accordance with the laws and
regulations in force.
•
Make sure that the power from the main grid is enough to supply the
power stated in the information tag placed on the front bottom of the
appliance.
•
If the current of fuse in your house is less than 16 Ampere, have a
qualified electrician connect a 16 Ampere fuse.
•
It is not advised to use adapters, multi plugs or extension cords.
•
Electricity safety of the appliance is guaranteed only if connected to suitable source correctly
with grounding in accordance with the rules. Our company cannot be held responsible for the
damages to people, animals or properties due to the failure to ground the appliance properly.
GROUNDING
WARNING: The appliance must absolutely be grounded.
• Your oven includes a grounded plug mounted on the grid cord. This plug must be used with
a grounded line. Have a licensed electrician do the grounding installation.
• Before supplying electricity to the appliance:
1. Place the oven in a way to make reaching the plug used for electricity connection or
double pole switch easier.
2. Do not let the electricity cable touch hot surfaces when placed and do not pin it to the
oven lid.
3. Contact the nearest authorized service if the electricity cable is damaged. Make sure
authorized service makes the chance with a new cable with plastic insulation at the
same size and that can withstand the electricity current the oven needs.
• A double pole switch with at least 3 mm between the contact points between the oven and
the electric wire and suitable for carrying the desired load in accordance with the laws in
force must be installed if the oven is to be connected directly to the electric wiring. Ground
wire must not be cut be double pole switch.
NOTE: Turn off electrical power before servicing the product.
BeFoRe MAIntenAnCe
1. 1. Before you start using the oven for cooking, you must remove the protective film from
the oven door.
2. After storage in a warehouse or transportation of the appliance at a temperature below
15°C, it is necessary to maintain it at room temperature for at least 2 hours before
switching on the power supply network.
3. Before starting use check that the power source parameters are correct. They must
coincide with the oven specifications. Then connect the oven to the power line.
4. Make sure that the ventilation holes are not closed.
5. Open the window for air circulation.
6. Set the oven temperature control to maximum (250 °C).
7. Set the Function button as Top and Bottom Grill (and + Fan if available).
8. Run the oven in this setup for 30-45 minutes.
