10
ВЕНТИЛЯТОР НАПОЛЬНЫЙ
STAND FAN
Инструкция по эксплуатации
SPEED MODES OF OPERATION
• The speed can be adjusted using the control buttons (17).
0
— disconnected
1
— low speed of rotation
2
— average speed of rotation
3
— high speed of rotation
ROTATION OF CASING
It is possible to work in a stationary position and with a turn of 90 °.
• Press the housing rotation button (14) on the upper surface of the housing to start or
stop rotation.
• You can install the housing at the desired angle by gently rotating it in any direction.
Clicking is normal.
• If the housing does not lock in the desired position, pull the screw underneath.
CLEANING
• Unplug the fan before cleaning.
• Wipe dust off the cabinet with a dry cloth.
• Difficult to remove stains wipe with a cloth soaked in alcohol.
• If you need to clean the blades, remove the front grille, and then unscrew the screw
that secures the blades. After this, rinse the blades with warm soapy water, then dry.
• Do not immerse the fan in water or other liquids. Make sure that no liquid gets into the
motor.
• The electric motor of the fan does not require lubrication.
• We recommend regular cleaning of your product.
• Never use solvents to clean the fan.
• In addition to cleaning, no further maintenance is required.
DISPOSAL CONSIDERATIONS
Before venting, the fan should be complete worthlessness. Remove the plug
from the socket first and then cut off the power cord. Further act in accordance
with local regulations concerning waste and garbage disposal.
