17
GB
Symbols
Warning/caution!
Read the Operating Instructions!
Before carrying out any work on the machi-
ne, disconnect the plug from the socket.
Protect against humidity
Never expose tool to rain.
Cable pulling / transport prohibited
Covering prohibited!
Protect against humidity
Protect against frost
Keep children and bystanders away while
operating a power tool.
Warning against dangerous electric
voltage
Keep bystanders in safe distance from the
appliance (at least 2m)
The appliance will reach its full heating power
after 5-10 min.
Caution - hot surface!
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
Protect against humidity
This side up
General Power Tool Safety Warnings
WARNING
Read all safety warnings and all instructions.
Failure to
follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future refe-
rence.
The term „power tool“ in the warnings refers to your
mains-operated (cordepower tool or battery-operated
(cordless) power tool.
Residual risks
Danger of injury !
Electrical residue risk
Direct/indirect electrical contact
may lead to
electric shock. The appliance is to be operated
only in electrical networks with protective RCD.
Thermal residual risks
Burns;
Touching the protective grille or housing
body can cause burns. Avoid these parts.
Despite compliance with all relevant building
regulations, there still can be some threats during
operation.
1) Work area safety
a)
Keep work area clean and well lit.
Cluttered or dark
areas invite accidents.
b)
Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust.
c)
Keep children and bystanders away while operating
a power tool.
2) Electrical safety
a)
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (groundepower tools.
Unmo-
dified plugs and matching outlets will reduce risk of
electric shock.
b)
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and refri-
gerators.
There is an increased risk of electric shock if
your body is earthed or grounded.
c)
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
ENGLISH
