Krabat SHERIFF S2, Руководство пользователя

Страница: 6 / 9

Use of the anti tippers
(accessories)
03.7
Fig. 09c
Outer position – activated
Fig. 09a
Inner position – deactivated
Fig. 09d
Change the angle of tipping – pull both plungers and
twist 180 degrees
Fig. 09b
Pull plunger and slide the anti tipper out
The Krabat Sheriff S2 can be fitted with 2 anti tippers. The standard position with 24” propelling wheels gives us
a max tipping angle of 7 degrees. This can easily be altered to 14 degrees. Krabat recommend all users to have
anti tippers fitted.
The Krabat Sheriff S2 has Quick Release shafts. This ensures
a quick and easy dismantle of the propelling wheels, when
transporting the chair.
Press in the button in the centre of the shaft whilst pulling
out the whole wheel (fig. 11). Always make sure the button
pops out when mounting the wheel. This is an indication
of a fixed shaft and a wheel ready for use. Make sure the
propelling wheels are mounted as prescribed, to avoid
dangerous situations.
The backrest can be folded down towards the seat to make
the wheelchair more compact during transport (fig. 11).
Do not send the Krabat Sheriff S2 on a plane without suitable
packaging (crate, suitcase, etc.). Shipping of the Krabat Sheriff
without the suitable packaging can harm the product and
cause dangerous situations.
The Krabat Sheriff S2 is not approved for car transport. The
child must be seated in a car seat.
It is important to tighten the screws properly after
adjustment.
Transport
04.0
Fig. 11 Dismantle / mounting of the propelling wheel and folding of the backrest
Adjusting the width
03.8
Fig. 10
Adjusting the width of the propelling wheels
The width of the chair is adjusted by pulling the
propelling wheels out. Loosen the screw shown in
fig 10, pull out and tighten the screw properly. If the
wheelchair is fitted with anti tippers, these need to be
loosened as well.
It is important to tighten the screws properly after
adjustment.
Krabat
Sheriff
11 10
Krabat
Sheriff