KPWL-0300 User's Manual
29
Advanced Settings
Wireless Backhaul Special Value
Item
Description
Values that can be set
Prescribed value
AMPDU
You can specify whether to link the frames through
A-MPDU (link including MAC header) on the backhaul
circuit.
ON (performed) / OFF (not
performed)
ON
AMSDU
You can specify whether to link the frames through
A-MSDU (link after MAC header only) on the backhaul
circuit.
ON (performed) / OFF (not
performed)
ON
Maximum
Retransmission (1-255)
Specify the number of retries for backhaul retransmission.
Normally, the default value is fine.
1 to 255
7
Minimum Contention
Window (1-255)
Specify the minimum value for the backhaul contention
value.
Normally, the default value is fine.
1 to 255
4
Route Update
You can specify this if you have selected a core in
"Backhaul Mode". Specify whether to automatically
reroute the backhaul.
ON, OFF
ON
Route Update Period
(1-65535)
You can specify this if you have selected a core in
"Backhaul Mode". If you selected ON for "Route Update",
specify the reroute period in units of seconds.
•
If the value is set from 1 to 10:
Specify the interval to reset route learning. The smaller
the value the more frequently the route is reset.
* Use when moving a KPWL itself. Normally, do not
specify.
•
If the value is set to 11 or higher:
Route update is done at the period of the value.
1 to 65535
300
Heal Switch
You can specify this if you have selected a core in
"Backhaul Mode". Specify whether to use the quick
recovery function.
ON, OFF
OFF
NACK Counts
Threshold for
Self-Healing (1-255)
You can specify this if you have selected a core in
"Backhaul Mode". If you selected ON for "Heal Switch",
specify the number of times to detect obstructions.
1 to 255
3
Privacy Switch
You can specify this if you have selected a core in
"Backhaul Mode". Specify whether to communicate
between terminals between devices.
ON, OFF
ON
TDD Mode
You can specify this if you have selected a core in
"Backhaul Mode". Set the TDD Mode.
ON, OFF
OFF
TDD Interval
You can specify this if you have selected a core in
"Backhaul Mode". Set the TDD Interval.
5
Broadcast Storm Guard
Set the Broadcast Storm Guard.
ON, OFF
OFF
VPN Setup
Item
Description
Values that can be set
Prescribed value
VPN Server Domain
You can specify this if you have selected a core in
"Backhaul Mode". Specify the TCP port and address to
connect to the PicoManager server. Specify this value if
PicoManager is being used. Specify the values noted on
the parameter sheet provided separately when
registering.
sample.com
VPN Server Port
Same as above
20000
VPN Fixed Server IP
Same as above
123.45.67.89
VPN Fixed Server Port
Same as above
20000
