KPWL-0300 User's Manual
20
6.3 Remote Settings
If the KPWLs that configure the network are mutually connected using relay circuits, it is possible to do the access
circuit settings of each KPWL from a computer connected to the core (parent) wired LAN.
Specify the IPv6 address that was automatically assigned to the main unit.
With remote settings, you can also specify rebooting or rerouting by operations from the web page. These operations
are effective when the KPWL-0300s are already installed, for instance if the installation is in a high location or there are
many passersby, so it is not possible to work near the devices.
However, there is a precondition that the relay circuits have been established (so that KPWL-0300 units can
interactively communicate), so changes cannot be made to devices (slave 4 in the example in the diagram) that are not
linked due to communications obstructions, etc.
Also, for the same reason, remote setting changes cannot be done to the relay circuits (the links break if the relay
circuit settings are changed).
Slave -1
Mac:xx-xx-xx-63-07-08
IPv6:
fd00:5043::ae64:ddff:fe63:0708
Such as a wired router or
hub
Slave -3
Mac:xx-xx-xx-60-01-02
IPv6:
fd00:5043::ae64:ddff:fe60:0102
Slave -2
Mac:xx-xx-xx-63-04-05
IPv6:
fd00:5043::ae64:ddff:fe63:0405
Core
Mac:xx-xx-xx-69-0A-0B
IPv6:
fd00:5043::ae64:ddff:fe69:0A0B
Slave -4
Mac:xx-xx-xx-6C-0D-0E
IPv6:
fd00:5043::ae64:ddff:fe6c:0d0e
It is possible to set the access circuits of the KPWL-0300 core and
slaves-1 to -3.
Example)
By inputting " http://[fd00:5043::ae64:ddff:fe60:0102]/" in the address bar,
You can access the web setting page of slave-3.
The access circuits can be set or rebooted/rerouted from the web.
