![background image](http://html1.mh-extra.com/html/kozy-heat/springfield-36/springfield-36_installation-and-operation-manual_1999660013.webp)
Nailing Flange Installation
SECTION 3
FRAMING
#SFD-36
R.6 February 2022
13
HUSSONG MFG. CO., INC.
KOZY HEAT FIREPLACES
3.3 Nailing Flange Installation
CAUTION: Never permanently remove these assemblies from the
fireplace—they must be secured regardless of finish material used.
1. Remove (2) nailing flanges from the right and left side of the
fireplace.
2. Align nailing flange with holes on outside corners of fireplace,
with the stand-off flanges on the nailing flanges facing away
from the fireplace.
3. Secure the nailing flanges to the fireplace with screws (provided)
through the slots in nailing flanges.
4. Bend perforation on nailing flange until parallel with fireplace
face. Do not bend toward fireplace face.
•
UNTIL ALL FRAMING REQUIREMENTS ARE COMPLETED:
Position framing stud against the small stand-off (located on
backside of nailing flange). Secure with nails or screws.
•
When installed, the nailing flanges provide the minimum 1/2”
(13mm) clearance from the sides of the fireplace to framing.
BACK VIEW
BACK VIEW
STAND-OFF FLANGE
NAILING FLANGE INSTALLED
NAILING FLANGE
AS SHIPPED
FIGURE 3.2
Nailing Flange Installation