12
FRAMING
Hussong Mfg. Co., Inc. • Kozy Heat Fireplaces
#ALP-36 R.7 January 2020
3.3 Nailing Flange Assembly
and Installation
CAUTION: Never permanently remove these assemblies from the
fireplace—they must be secured regardless of finish material used.
1. Remove (2) nailing flanges from the right and left side of the
fireplace.
2. Align nailing flange with holes on outside corners of fireplace,
with the stand-off flanges on the nailing flanges facing away
from the fireplace
3. Secure the nailing flanges to the fireplace with screws (provided)
through the slots in nailing flanges.
4. Bend perforation on nailing flange until parallel with fireplace
face. Do not bend toward fireplace face.
5. Position framing stud against the small stand-off (located on
backside of nailing flange). Secure with nails or screws.
•
When installed, the nailing flanges provide the minimum
1-1/8” (29mm) clearance from the sides of the fireplace to
framing.
Figure 3.2, Nailing Flange Installation
FRAMING STUD
STAND-OFF
FLANGE
11⁄8” (29mm)
CLEARANCE
STAND-OFF
FLANGE
NAILING FLANGE
FRAMING STUD
FRONT VIEW
TOP VIEW
BACK VIEW
NAILING FLANGES
INSTALLED
NAILING FLANGES
AS SHIPPED
