4-Port Cable/DSL Broadband Router Use’s Guide
28
Unchecked means reverse.
Rule Name:
Enter any name you want to use for the Application Name.
Source IP address:
Enter the IP address that you wish to apply this Access
Control rule.
Protocol.
Select the protocol type (TCP, UDP, FTP, HTTP).
Destination Port.
You can assign up to a port number or a port range. The
router will block clients from accessing Internet services that use these ports.
Days To Block,
Chose days to block
Times To Block,
Chose time to block.
Current Access Control Table:
This display shows the valid Current Access
Control rules in Broadband Router. User can view the information about Current
Access Control Table.
Fill in the all of the setting to be added and then click "Add". Then this Special
Application setting will be added into the "Current Trigger-Port Table" below.
If you want to remove some Special Application settings from the "Current Access
Control Table", select the Special Application settings you want to remove in the
table and then click "Delete ".
When finished making your changes on this screen, click the Save button to save
these changes.
4.6.3 URL Filtering Configuration
You can enter keywords specific to the site in these fields. The Router will block
access to sites that use those keywords.
NOTE:
You can use wildcards (*and?); "*" is the multi-letters; "?" is a letter;
For example:*.*sex*.* express that all URL with "sex" will be blocked!
Figure 4-18
Fill in the all of the setting to be added and then click "Add". Then this Special
Application setting will be added into the "Current URL Filtering Table" below.
If you want to remove some Special Application settings from the "Current URL
Filtering Table", select the Special Application settings you want to remove in the
table and then click "Delete ".
When finished making your changes on this screen, click the Save button to save
these changes.
