4-Port Cable/DSL Broadband Router Use’s Guide
23
Routing function.
Add:
Click this button to add a new static routing. When you click this button, the
next figure appears.
Current Routing Table:
This display shows the valid routing paths in
Broadband Router. User can view the information about current routing paths
Fill in the all of the setting to be added and then click "Add". Then this Special
Application setting will be added into the "Current Routing Table" below.
If you want to remove some Special Application settings from the " Current Routing
Table ", select the Special Application settings you want to remove in the table and
then click "Delete ".
When finished making your changes on this screen, click the Save button to save
these changes.
4.5 NAT
Network Address Translation (NAT) allows multiple users at your local site to access
the Internet through a single Public IP Address. NAT provides Firewall protection
from hacker attacks and has the flexibility to allow you to map Private IP Addresses
to Public IP Addresses for key services such as Websites and FTP.
When finished making your changes on this screen, click the Save button to save
these changes.
4.5.1 DMZ Host Setup
The DMZ screen allows one local user to be exposed to the Internet for use of a
special-purpose service such as Internet gaming and videoconferencing. DMZ
hosting forwards all the ports for one PC at the same time.
Figure 4-12
Check DMZ and enter the host IP and then press "Apply" button to setup DMZ host.
When finished making your changes on this screen, click the Save button to save
these changes.
4.5.2 FTP Private Port
FTP private port enables user to setup FTP server which is not using the standard
port 21.
