manualshive.com logo in svg

Kozumi air force one 2 lite, Руководство пользователя

Поделиться
Скачать
Kozumi air force one 2 lite Скачать руководство пользователя страница 4

 
 

   

Open a WEB browser, i.e. Microsoft Internet Explore, then enter 

192.168.1.254

 on the URL to 

connect the WLAN Access Point. 
 

 

 

Prepare your PC to configure the WLAN Access Point 
 
For OS of Microsoft Windows 95/ 98/ Me: 

1. Click the Start button and select Settings, then click Control Panel. The Control Panel window 
will appear. 
Note: Windows Me users may not see the Network control panel. If so, select View all Control 
Panel options on the left side of the window 
2. Move mouse and double-click the right button on Network icon. The Network window will 
appear. 
3. Check the installed list of Network Components. If TCP/IP is not installed, click the Add button to 
install it; otherwise go to step 6. 
4. Select Protocol in the Network Component Type dialog box and click Add button. 
5. Select TCP/IP in Microsoft of Select Network Protocol dialog box then click OK button to install 
the TCP/IP protocol, it may need the Microsoft Windows CD to complete the installation. Close and 
go back to Network dialog box after the TCP/IP installation. 
6. Select TCP/IP and click the properties button on the Network dialog box. 
7. Select Specify an IP address and type in values as following example. 

 

  IP Address: 192.168.1.1, any IP address within 192.168.1.1 to 192.168.1.253 is good to 

connect the Wireless LAN Access Point. 

 

  IP Subnet Mask: 255.255.255.0 

8. Click OK and reboot your PC after completes the IP parameters setting. 
 

For OS of Microsoft Windows 2000, XP: 

1. Click the Start button and select Settings, then click Control Panel. The Control Panel window 
will appear. 
2. Move mouse and double-click the right button on Network and Dial-up Connections icon. Move 
mouse and double-click the Local Area Connection icon. The Local Area Connection window will 
appear. Click Properties button in the Local Area Connection window. 
3. Check the installed list of Network Components. If TCP/IP is not installed, click the Add button to 
install it; otherwise go to step 6. 
4. Select Protocol in the Network Component Type dialog box and click Add button. 
5. Select TCP/IP in Microsoft of Select Network Protocol dialog box then click OK button to install 
the TCP/IP protocol, it may need the Microsoft Windows CD to complete the installation. Close and 
go back to Network dialog box after the TCP/IP installation. 
6. Select TCP/IP and click the properties button on the Network dialog box. 
7. Select Specify an IP address and type in values as following example. 

 

IP Address: 192.168.1.1, any IP address within 192.168.1.1 to 192.168.1.253 is good to 

connect the Wireless LAN Access Point. 

 

IP Subnet Mask: 255.255.255.0 

8. Click OK to completes the IP parameters setting. 
 

For OS of Microsoft Windows NT: 

1. Click the Start button and select Settings, then click Control Panel. The Control Panel window 
will appear. 
2. Move mouse and double-click the right button on Network icon. The Network window will appear. 
Click Protocol tab from the Network window. 

Содержание air force one 2 lite




































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды