manualshive.com logo in svg

Kozumi air force one 2 lite, Руководство пользователя

Поделиться
Скачать
Kozumi air force one 2 lite Скачать руководство пользователя страница 19

 
 

   

 

 

IP Address 
Fill in the IP address of LAN interfaces of this WLAN Access Point. 
Subnet Mask 
Fill in the subnet mask of LAN interfaces of this WLAN Access Point. 
Default Gateway 
Fill in the default gateway for LAN interfaces out going data packets. 
DHCP 
Click to select Disabled, Client or Server in different operation mode of wireless Access Point. 
DHCP Client Range 
Fill in the start IP address and end IP address to allocate a range of IP addresses; client with 
DHCP function set will be assigned an IP address from the range. 
Show Client 
Click to open the Active DHCP Client Table window that shows the active clients with their 
assigned IP address, MAC address and time expired information. [Server mode only] 
DNS Server 
Manual setup DNS server IP address. 
Domain Name 
Assign Domain Name and dispatch to DHCP clients. It is optional field. 
802.1d Spanning Tree 
Select to enable or disable the IEEE 802.1d Spanning Tree function from pull-down menu. 
Clone MAC Address 
Fill in the MAC address that is the MAC address to be cloned. Refer to 4.24 What is Clone MAC 
Address? 
Apply Changes 
Click the Apply Changes button to complete the new configuration setting. 
Reset 
Click the Reset button to abort change and recover the previous configuration setting. 

Содержание air force one 2 lite




































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды