Kowa VX-20 Скачать руководство пользователя страница 20

Страница: 20 / 88

1 System description

Lamp cover

Internal fixation target

socket

W.D. switch

It turns on/off the illuminating dots

for detecting the alignment position

of the retinal camera. It can be

used for mydriatic color photogra-

phy, Red Free photography, Fluo-

rescence angiography, and auto-

fluorescence photography (FAF).

F.D. switch

It turns on/off the luminous bar for

detecting the focus. It can be used

for mydriatic color photography,

Red Free photography, Fluores-

cence angiography, and autofluo-

rescence photography (FAF).

Focusing knobs

Knobs located on both sides of the

optical head base, used for focusing.

Tilting handle

This is a handle to tilt the optical head.

There is a lock mechanism.

Grip socket

Located on the both sides.

Air vent

Wind generated by the internal

cooling fan blows out.

Forehead rest

Used for resting the pa-

tient’s forehead against it.

Objective lens

Head band mounts

Mount to attach the head

band. Located on the both

sides.

Chin rest

Used for sustaining the pa-

tient’s chin position.

Power supply unit

(See the next page for details)

Tilting arm

It helps to move the optical head

upward/downward.

Содержание VX-20

























































































Результаты поиска

Содержание VX-20

Отзывы:

Kowa VX-20, Инструкция по эксплуатации, Страница: 20 / 88

Результаты поиска

Содержание VX-20

Отзывы: