Name of signal
Transmission distance
Audio signal/serial data
:
10
〜
300m(32.8
〜
984.2ft)
Composite signal
:
10
〜
300m(32.8
〜
984.2ft)
YPbPr
/
YCbCr
:
10
〜
300m(32.8
〜
984.2ft)
640
×
480
:
10
〜
200m(32.8
〜
656.1ft)
800
×
600
:
10
〜
180m(32.8
〜
590.5ft)
1024
×
768
:
10
〜
150m(32.8
〜
492.1ft)
1280
×
1024
:
10
〜
120m(32.8
〜
393.7ft)
1600
×
1200
:
10
〜
100m(32.8
〜
328ft)
1-2 General Information
This product, KE811CT(w-type), is a transmitter for long distance transmission of one line selected
from RGB video, component video or composite video through a twisted pair cable (CAT5e or CAT6).
In addition to video , one line of audio (stereo) , and serial command (*1) can be transmitted through
a serial port.
By INPUT switch, it is possible to control PDP or projector at the same time as switching of
video and audio .
(*1) Beforehand registered serial command is transmitted.
The minimum recommended transmission distance is 10m(32.8ft). The maximum recommended
transmission distance depends on the refresh rate and resolution. The transmission distance
(when using our recommended cable) is as follows.
Recommended cable : OKTP-E5-P-AWG24x4P
(OKANO ELECTRIC WIRE CO.,LTD)
The features of this product are below mentioned.
・
Transmitting one line for twisted pair (2 distributed outputs) and one line for monitor
independently selected from video (three composite and one component signals) 4 inputs
and RGB 4 inputs.
Audio and command are transmitted at the same time.
・
Beforehand registered (*2) command can be transmitted by pressing of INPUT buttons.
・
Command transmission may be allocated to DISPLAY POWER, OPTION and INPUT buttons.
・
Screen etc.. can be controlled by contact output in conjunction with OPTION button selecting.
・
Tally output of rear panel is transmitted synchronizing with buttons.
・
This product can be controlled by serial communication and parallel input.
(*2) Exclusive software is required to register commands.
‑2‑