background image

NOTE: 

This equipment has been tested and found to comply with the limits for

      a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are 
      designed to provide reasonable protection against harmful interference when the 
      equipment is operated in a commercial environment. This equipment generates, 
      uses, and can radiate radio frequency energy and, if not installed and used 
      in accordance with the instruction manual, may cause harmful interference to 
      radio communications. Operation of this equipment in a residential area 
      is likely to cause harmful interference in which case the user will be required to 
      correct the interference at his own expense.  
      
      This device complies with part 15 of the FCC Rules.
      Operation is subject to the following two conditions:
          (1) This device may not cause harmful interference, and 
          (2) this device must accept any interference received, including interference
              that may cause undesired operation.        

RGB Interface Cable

Use of a RGB interface cable longer than 3 m (9.84 feet) is not recommended.

    This Class A digital apparatus complies with Canadian ICES-003.
    Cet appareil num

érique de la classe A est conforme 

à

 la norme NMB-003 du 

    Canada.

For CANADA

For U.S.A

Содержание KE811CT




































Отзывы: