
9
8
Do not use the loader in the environment with
air containing explosive dust or explosive gases
or where the loader may come into contact with
flammable material.
Do not use the loader without completed training.
Read the labels (stickers) on the machine, Manual
for Maintenance and Operation and Manual
for Operation.
Do not leave the motor turned on and arms lifted
without any supervision.
While parking lower the devices straight to the ground.
3. SUMMARY SAFETY RULES
Before the start of operation the operator must have all the necessary instructions for the machine operation. The untrained operators can cause injury or death.
4. MANDATORY ACTIONS BEFORE LAUNCHING THE LOADER
1.
Before putting the loader into operation, make sure that its safe operation is guaranteed (see chapter 9.2. Operation and maintenance manuals).
2.
Do not remove or turn off safety devices or switches.
3.
Make sure there is no other person or living creature in the driving area.
4.
Open the upper hydraulic cover.
5.
Turn the connector to the correct position and push it in as far as it will go.
5. SAFETY EQUIPMENT
The loader Elise900 must be always equipped with safety components during every use. Information about the safe use of equipment and devices will be
provided by your dealer.
SAFETY EQUIPMENT:
1.
MANUAL FOR OPERATION:
Must be placed in the cab.
2.
SAFETY LABELS (STICKERS):
Replace them in case of damage.
Do not use the loader as a platform for lifting
the person.
Before the use, check the technical condition
of the loader.
Damaged components need to be replaced
immediately. Check the tire pressure regularly.
For loading the material and travel with the material
do not exceed the speed of 6 hm/h.
Keep the operated device in the lowest possible
position while driving.
Do not exceed the rated operating capacity
of the loader and individual additional devices.
Keep a safe distance from power lines while working
near them.
Do not operate the loader while or after ingestion
of drugs, alcohol or medication affecting the reactions
of a person.
Do not adjust the work equipment. Use only
the equipment approved by the company Kovaco
Electric for the given loader model.
Keep the scoop and other devices as low as possible.
Do not drive nor turn the machine with the arms lifted.
Load, unload and turn the machine on the straight
surface.
Never transport other persons.
Make sure no authorized persons are in the work
area.
Do not lift the load to extreme heights during
the travel in the slope.
Pay attention to the condition of the terrain
(evenness, strength).
The braking distance is extended during the travel
of loaded loader. Therefore, take extra care while
working on a sloping, muddy, icy or uneven surfaces.
Содержание MiniZ400
Страница 1: ...MiniZ400 Operation manual...
Страница 6: ...COPYRIGHT KOVACO Electric a s All rights reserved...