45
Platinum Bio
controller service manual - ENGV 04.11
Experts in heating
3
. Operation
1
6.
1
Menu
naviga
t
ion
The device has two types of menus:
Simple Menu
– provides quick access to the basic functions of
the controller. Access to menu is simple by pressing „up arrow”
or „down arrow” on the main screen. Description of the simple
menu, see chapter „Simple Menu”
Main Menu
– allows you to access all the functionality of the
controller (status monitoring, change of settings and service set
up). Access to the main menu is performed by depressing the
bush-button „Confi rmation, enter” on the main screen.
Description of the main menu, see chapter „Main Menu”.
Return to the main screen is possible from any screen by depressing
the „Return, ESC” push-button several times.
NOTE!!!
Service menu is intended only for qualifi ed
technical personnel. Changes may cause improper
operation of the system.
1
6.2
T
urning
on
t
he
con
t
ro
ll
er
To turn on the controller (ON mode) depress „Return, Esc” push-
button on the main screen and hold for 3 seconds , when it is in the
OFF mode.
1
6.
3 T
urning
o
ff t
he
con
t
ro
ll
er
To turn off the controller (OFF mode) depress „Return, Esc” push-
button on the main screen and hold for 3 seconds ,
when it is in the ON mode.
NOTE!!!
When you turn off the controller, depending
on the prior status, the burner can still work
(damping) this status should not be interrupted.
If the device is to be disconnected from the mains,
wait for damping process termination,
until the burner status is „off ”.
•
•
1
6.4
T
imer
programs
The controller is equipped with a clock and calendar. This makes it
possible to program the operation of individual heating circuit
components depending on the current time and day of a week.
Date and time are not reset during power failure since the controller
is equipped with a battery that must be replaced every two years.
Programming takes place in the menu of a given circuit
(e.g., hot water, heating, buff er) and for each item it proceeds
in the same way.
Choice of the week’s day.
Upon entering the „Timer program” menu, the day of the week fl a-
shes with arrow buttons, select the day you want to set or just check
the settings of the program.
Programming.
After selecting the day of the week and confi rming with the enter
button the indicator of the currently programmed hour starts fl ashing,
at the same time the said hour is displayed, and next to it an icon
that represents the currently selected time zone is displayed.
(the symbol of the sun means comfort temperature, the moon is
a symbol of the economic temperature.) To come to next hour press
the down arrow (economic temperature) or the up arrow (comfort
temperature). If the whole day is already programmed according to
our whish, press the enter button. On approving the changes
approved (or cancelling), a week’s day starts fl ashing.
!
!
3
.1 Menu navigation
3
.2 Turning on the controller
3
.
3
Turning o
ff
the controller
3
.4 Timer programs