Specifications
Control unit model
Maximum power
of the electric heater, kW*
Supply voltage, V
Control voltage, V
Frequency, Hz
Temperature adjustment range, C
Hysteresis, C
Maximum time of operation, h
Maximum start delay, h
Control box dimensions, WхHхD, mm
Switching unit dimensions, WхHхD, mm
Weight, g
Operating temperatures of control box and
switching unit, C
Relative humidity of the air
of control box and
switching unit,
%
Operating temperature of temperature sensor, C
Storage temperature,
С
T
ype of installation
GEOS
-
CONTROL
12
12
GEOS
-
CONTROL
18
18
220/380*
12
50 (60)
40 - 120
3
6
24
140х121х50
200х150х72
1100
0
to
35
45-80
0
to
130
Minus 10 to plus 60
indoor
Note: *no more than 30 A per relay switch.
6
Electrical equipment shall be installed and connected in accordance with PUE and GOST R IEC
60335-2-53 by certified electricians with an electrical safety access qualification level III or higher.
CAUTION! Before connecting and installing the control unit, make sure to check its completeness. It
should be in accordance with the delivery list that can be found in the item's datasheet.
CAUTION! When connecting and installing the control unit, follow the sequence of operations pro-
vided in this OM.
To uninstall and disconnect the control unit, reverse the installation/connection sequence.
Fire safety requirements
CAUTION!
Control units and electric heaters (sauna heaters) shall be installed and operated in accor-
dance with Resolution of the Government of the Russian Federation No. 390 dated 25 April 2012 (as
amended on 6 April 2016) On the Fire Safety Regime and with the Fire Safety Regime Rules in the
Russian Federation.
CONTROL UNIT INSTALLATION
OBVIOUS ADVANTAGES.
INFORMED
CHOICE
