Install the L bracket and the anti-slip
rubber on the front fork and adjust it to the
proper height and angle.
Use the cable tie to fix the bracket on
the front fork. Make sure the disc
screw could pass the hole on the bracket for
you to install the sensor into the same hole for
catching the speed signal.
Install the speed sensor into the proper
hole on the bracket.
Adjusting the distance between the sensor
and screw to get the best speed signal.
Make sure the distance is under
2 mm
to get the best signal.
MOTO / SCOOTER
S type speed sensor bracket instruction
MOTO / SCOOTER
L type speed sensor bracket instruction
Loose the screw on the caliper
Install the S type bracket on the caliper.
Adjust the bracket to the proper angle
and then screw it up. Make sure the disc
screw could pass the hole on the bracket for
you to install the sensor into the same hole for
catching the speed signal.
Install the speed sensor.
Adjusting the distance between the sensor
and screw to get the best speed signal.
Make sure the distance is under
2 mm
to get the best signal.
After installation, use your hand to turn the tire to see is everything ok. The LED on the active speed sensor will light up once
the signal is detected.
speed
sensor
speed
sensor
speed
sensor
speed sensor
speed sensor
EX. 1
EX. 2
speed sensor
speed sensor
EX. 3
The best detect area: Please detect the speed signal from the gaps of the sprocket.
The sprocket
The active speed sensor can be installed by the metal parts to detect the speed.
EX. 1 The disc screw.
EX. 2 The disc to detect the disc gap. (Make sure the distances between the gaps are the same in advance to avoid wrong
speed signal.)
EX. 3 The sprocket to detect the disc gap. (Make sure the distances between the gaps are the same in advance to avoid wrong
speed signal.)
We suggest you to catch the speed from the disc screws. The more the sensor points are, the better the speed accuracy is. The
maximum sensor points the speed sensor could detect is 60 points per turn.
The hexagon socket disc screw
The best detect area: The edge of the hexagon socket screw.
Please don't catch the signal from the middle hole of the hexagon socket screw to avoid wrong signal.
speed
sensor
speed
sensor
The hexagon screw
The best detect area: The middle of the screws.
Some hexagon screw center is with a small hole in the center in this case, we will suggest you to catch
the signal from the edge of the screw like the hexagon socket screw.
The disc
The best detect area: Please detect the speed signal from the gaps of the disc.
Take note that there are discs with the gaps in different difference, and this method will not work on it!
Take note that there are sprockets with the gaps in different difference, and this method will not work
on it!
the detect range
the detect range
the detect range
the detect range
P.S
