Koshin GV-3000, Руководство по эксплуатации

Страница: 16 / 36

13
OPERATION
The generator has been shipped without engine oil. Fill with oil or it will not start.
STARTING THE ENGINE
Before starting the engine, do not connect any electric devices.
1. Turn the AC circuit breaker to “OFF” position. The generator may be hard to start if a
load is connected.
2. Turn the fuel valve lever to the ON position.
3. To start a cold engine, move the choke lever to the CLOSED position. To restart
a warm engine, leave the choke lever in the OPEN position.
4. Turn the engine switch to the ON position.
5. Pull slowly on the recoil starter until it is engaged, then pull it briskly.
NOTICE
Do not allow the starter grip to snap back against the engine. Return it gently to prevent
damage to the starter or housing.
6. Turn the choke lever back to the “OPEN” position.
Turn the engine switch to the START position.
・
Take your hand off the switch immediately after the engine starts.
・
If the engine fails to start, release the switch, wait a few seconds, and then try
again. Each attempt should be as short as possible to preserve the battery. Do
not crank the engine more than 10 seconds on any one attempt.
CAUTION
Electric Starting Model (GV-7000S, GV-7600S)
NOTE
CAUTION