Koryo KWH-IN1 Hot Splash, Руководство пользователя

Страница: 3 / 8

Part Description
Important Safeguards
1. Front Casing
2. Indicator Lamp Red
3. Cut-out Lamp Orange
4. Out Let
5. Inlet/safety Valve
1
3
5
4
2
1. Installation of the water-heater should be done by authorized personnel only.
2. Future Retail Limited cannot be held responsible for the damages caused by wrong installation by
any unauthorized installation, usage of sub-standard water or not following instructions included in
this instruction manual.
3. When newly installed, make sure that the water flows freely from the outlet tap (or spout) before
electric supply is switched on.
4. Inlet water line should be continuously open when water heater is in use except when it is
being serviced.
5. When no more hot water is required the electric supply must be switched “OFF”.
6. Switch off water heater when not in use.
7. The red indicator lamp, which is ON during the normal operation, goes OFF when the thermostat
is activated.
8. The orange indicator lamp, goes OFF at cut-off operation. Take the appliance to your near-by Koryo
authorized service center or call Koryo customer care.
9. Use pressure reducing valve, if the height of the over head water tank from the water heater is more
than 30 meter..
10. The electrical connection should be in accordance with the instruction given.
(under section Electric Connection on Page no.5 )
3