KORTING HI-6450, Руководство по эксплуатации

Страница: 32 / 80

continue to operate and the cooking level set previously, e.g. 6 .
• “Pause” function (Fig.2 - Fig.3 (B)):
This function will set to pause the device, maintaining in the
memory the cooking programs previously set in the memory.
The hob can remain in this situation for maximum 10 minutes.
Then, the hob will switch off permanently.
Activation:
- Select key “ Pause ” ( B ) and the relative LED ( C ) will start
flashing. The symbol will be displayed.
Restore of the cooking phase:
1. The cooking phase can be restored within 10 minutes.
2. Select key “
Pause
” (
B
) and the relative LED (
C
) will start
flashing.
3. Select one of the
cooking area
selection keys (
E
) within
approximately 10 seconds.
• “Recall” function (Fig.2 - Fig.3 (B)):
The “
Recall
” function allows reactivating the hob with the
same set functions in the event that the “
ON/OFF
” button is
pressed by mistake whilst one or more zones are activated.
If the “ON/OFF” key is accidentally pressed:
- Select key “
ON
/
OFF
” (
A
) within approximately 6 seconds and
the relative LED (
C
) will start flashing.
- Select key “
Recall
” (
B
) within approximately 6 seconds.
• Maintenance (Fig.7):
Remove any residues of food and drops of grease from the
cooking surface using the special scraper supplied on request.
Clean the heated area as thoroughly as possible using SIDOL,
STAHLFIX or similar products and a cloth/paper, then rinse
with water and dry with a clean cloth. Using the special scraper
(optional) immediately remove any fragments of aluminium
and plastic material that have unintentionally melted on
the heated cooking area or residues of sugar or food with a
high sugar content. In this way, any damage to the cooktop
surface is prevented. Under no circumstances use abrasive
sponges or irritating chemical detergents such as oven sprays
or stain removers.
THE MANUFACTURER DECLINES ALL RESPONSIBILITY
FOR EVENTUAL DAMAGES CAUSED BY BREACHING THE
ABOVE WARNINGS.
- 32 -