Kortel Design Kanibal Race II, Руководство пользователя

Страница: 47 / 104

Speedbar passage tube Speedbar
cords
Pulleye
Speedbar
Wing-side speedbar
47
1
2
3
4
5
KANIBAL RACE II & ST
Installing the speedbar :
To install the speedbar, simply pass the cord through the
pulley on the side of the harness and then insert it into the
tube along the thigh, under the cover.
The connection and the length adjustment are done with a
knot at the level of the speedbar.
The optimum setting allows you to take advantage of the full
range available on the wing when the second bar is pushed
with your legs extended.
2
3
1
2
2
4
Connection to the wing :
To connect the speedbar to the wing, proceed as follows
(Steps 1 to 4)
Step 2 Step 1 Step 3
Step 4
5
2
Preparing your harness
Accessoires
The speedbar should not be set too short. The wing must not be in
The speedbar should not be set too short. The wing must not be in
the accelerated position without voluntary action of the pilot on
the accelerated position without voluntary action of the pilot on
the speedbar.
the speedbar.