Korona 4053035810010, Инструкция по эксплуатации

Страница: 14 / 74

14
1. Front Grill
(incl. decorative plate + 3 screws)
2. Fan Blade
3. Rear Grill Fastener
4. Rear Grill
5. Motor unit
6. Osciliation control knob
7. Appliance body
8. Speed control Buttons
-0 (Off)
-1 (Low Speed)
-2 (High Speed)
9. Fan base
10. Saftety Screw
11. Power cord and plug
12. Rubber Feet (x4)
DESCRIPTION OF PARTS
BEFORE FIRST USE
• Remove all packaging material and check whether the appliance is complete and that all
accessories are included.
• Fully unwind the power cord.
• Clean the appliance as described under
Cleaning and Care.
If any items are damaged or missing, contact your dealer or customer service.
Warning: Plastic bags are a danger to toddlers and babies, therefore keep them away
to avoid suffocation.
ASSEMBLY
Always ensure that the fan is unplugged from the power supply and turned off
before commencing with the assembly process.
1. unscrew the rear grill fastener (3) from the shaft of the motor unit (5) by rotating it anti-
clockwise.
2. Position the rear grill (4) over the shaft against the front of the motor unit (5) with its handle
at the top. Ensure that the locating pegs on the motor unit (5) are correctly inserted into the
holes of the rear grill (4).
3. To secure the rear grill (4), re-attach the fastener (3) to the shaft of the motor unit (5) and
turn it in clockwise direction until it is firmly tightened.
4. Push the fan blade (2) onto the motor shaft and make sure that it is properly positioned.
5. Attach the decorative plate onto the front grill (1) and secure it with the included screws.
6. Position the front grill (1) against the rear grill (4). Make sure that the grill clips are open.
Align the clip on top of the front grill (1) and clip it to the rear grill (4). Secure front (1) and
rear grill (4) with the safety screw and close all other grill clips.
Note:
Always attach the safety screw (10) to ensure that the grill is properly assembled!
7. Insert the 4 rubber feet to the base.
Always make sure that the fan is properly assembled and unplugged before
operation, changing the tilting angle and changing the direction of the air current
(oscillation).
8 9
7
10
11 12
1 2 3 4
5 6