1. Self-cleaning mode
After the beverage is ready, the “Clean” light will flash. Please remove the beverage container before cle-
aning.
Touch the „Start/Cancel“ button to enter the automatic cleaning process. You will hear 2 beep sounds in-
dicating the start. Cleaning will take 5 to 6 minutes. Please note that short breaks during cleaning intervals
are normal. The appliance will make 9 beep sounds and the “Dry” light will flash once cleaning is finished.
To ensure a full clean, do not interrupt the cleaning process before you hear the beep sounds.
If the drink is too viscous or there are clogs in the mixing chamber that were not crushed, please remove
the clumps manually before using the cleaning program.
2. Dry mode
Once the “Dry” light flashes after cleaning is finished, touch the “Start/Cancel” button again to start the
hot drying function. The drying process will take around 9 minutes and you will hear 9 beep sounds once it’s
finished. For best results please do not interrupt the program before the beep sounds.
Please note that the heating effect is related to the room temperature and the distribution of water stains.
In case the mixing chamber is not fully dry, use a clean cloth to dry the mixing chamber before storing the
drink maker away.
A small amount of residual water might be drained from the pulp outlet during hot drying. Please place the
wastewater basin under the outlet to catch the liquid.
Both cleaning and hot drying functions can be canceled during the whole process.
3. Cleaning the mixing chamber
If the outlet is clogged because of too many ingredients, please remove the remaining ingredients from
the mixing chamber first. Then long press the “Capacity” and “Timer” buttons for 3 seconds to open the
valve and discharge the remaining water in the mixing chamber. This way, any residues in the outlet can
be removed.
After the process is finished, long press again “Capacity” and “Timer”for 3 seconds to return to the main
menu. You can proceed to clean the chamber with the regular self-cleaning function by touching the “Cle-
an/Dry” button and then pressing “Start/Cancel”
4. Cleaning spare parts
The above 3 accessories can be removed from the machine to be cleaned with water.
After removing and cleaning the components, it is recommended to either manually dry or let the com-
ponents air dry before reassembling and storing the appliance away. Store the appliance in a dry and
ventilated space.
6. CLEANING
Wastewater basin
Lid of mixing chamber
Steam valve
