5. Start operation
Press the „Start“ button to begin operation; press again within 30 seconds to cancel the current selection
to choose a different function. Press again to cancel the current menu pulping and re-select.
6. Clean/Hot dry
Be sure to remove the drink container before cleaning. After the drink is finished, the system automatically
jumps to the cleaning function. At this time, the cleaning function light flashes. Press the „Start cancel“
button to enter the automatic cleaning process. After the cleaning is completed, the hot drying function
light flashes, touch the „start cancel“ button to enter the hot drying sterilization process. Cleaning and
heating function can be cancelled during the whole process.
Be noted:
Please add ingredients totally according to IM/Recipe, in case of overflow, blocking, or bad grinding
issue. Please do not add too many ingredients with much fiber, in case of blocking of outlet.
MAINTENANCE
Mixing chamber cleaning
1. Menu selection
Press ”Clean/Dry” function to choose Cleaning or Hot drying, the light will flash during the function is
selected.
2. Start cleaning function
Press “Start/Cancel” button to start cleaning countdown. Cleaning and heating function can be
cancelled during the whole process.
- After all the functions are finished normally, open the lid and dry the grinding, no need to use the hot
drying function.
- The heating effect is related to the room temperature, the amount of water stains and the distribution
of water stains.
- A small amount of residual water will be drained from the pulp outlet during hot drying. Please place a
wastewater basin to prevent liquid from flowing out.
- In the standby state, long press the „Capacity“ + „Timer“ button to open the valve to discharge the
drink. The drink in the cup is too large. If the drink in the Mixing chamber is too viscous or there are lumps
that are not crushed, please take out the lumps and use the cleaning function to solve it. It is forbidden
to discharge the drink manually to avoid clogging the drink pipe.
Spare parts cleaning
1. The above 3 accessories can be removed from the machine to be cleaned with water.
2. When the use of too much ingredients result in a obstructed dispense valve, please remove the
remaining ingredients in the grinding compart, manually clear the dispense valve, and use the
„cleaning“ function to clear the system.
3. After removing and cleaning machine components, it is recommended to either manually dry or let the
components air dry before reassembling and the storing the device in a dry and ventilated space.
Wastewater basin
Lid of Mixing chamber
Steam valve
