12
the note name C#, then fine-tune the
instrument so that the meter needle will
point the down arrow
▼
(–13.7 cents) on the
left side of the meter. If you want to raise
the note of A (0 cent) by a pure minor 3rd,
tune your instrument so that the display
will indicate note name C, then fine-tune
the instrument so that the meter needle will
point the up arrow
▼
(+15.6 cents) on the
right side of the meter.
Sound-out mode
In this mode, you can tune your instrument by
referring to the oscillator sound at the reference
pitch (output from the speaker of the WR-01).
1. Press the [SOUND] button to engage
sound-out mode.
2. Press the [SOUND UP] or [SOUND DOWN]
button to select the name of the that which
you want to tune to.
You can select a pitch in the range of C4
(261.63Hz) to C5 (523.25Hz).
3. Tune your instrument while referring to the
oscillator sound at the reference pitch
output from the receiver.
4. To exit Sound-out mode, press the [SOUND]
button.
