Overview page
18
6: Mod Knob mode
[Performance, Layer A/B/C/D]
These radio-buttons control whether to show the Performance Mod Knobs, or the Program Mod Knobs for the current
Layer.
Performance:
The knobs will show the Performance Mod Knobs, which can modify parameters in any or all Layers at
once.
Layer A/B/C/D:
The knobs will show the values for the current Layer’s Program.
7. Wave Sequence Overview
This shows a real-time overview of the Wave Sequence for the Program’s newest-sounding voice.
Note: Through modulation and probability, each voice in each Lane of each Wave Sequence may be on different steps,
and may also have different Start/End/Loop Start/Loop End settings.
Single Multisample display
When the Wave Sequence page Mode parameter is set to
Single Multisample
, the Multisample and its related
parameters are shown instead of the Wave Sequence Overview.
8. Program parameters
This section offers immediate access to the most commonly-used Program settings, including tuning, filter settings,
and pan.
9: Program Select
This is the Program assigned to the Layer (see “Structure” on page 2). Use the < and > arrows to step through
Programs one by one, or click on the name to bring up a browser window. Right-click/control-click (macOS) on the
name to bring up a contextual menu for saving and renaming.