Korg Triton-Rack, Руководство по параметрам

Страница: 38 / 287

31
COMBI
1.1
2.1
2.2
2.3
3.1
3.2
3.3
3.4
4.1
4.2
4.3
4.4
6.1
7.1
7.2
7.3
2. Combination mode
For details on how to select pages in Combination mode,
refer to p.1. In this display page you can select and play Combinations.
1.1–1: Combi
(Combination)
1.1–1a: Bank, Combi Select, Category, Cat.Hold,
10’s Hold,
Bank (Bank Select) [INT-A…INT-E, EXB-A...EXB-H]
This indicates the combination bank.
Use the [BANK] and [A]–[H] keys to select the bank.
To select combinations from an internal bank INT-A–INT-E,
press the [BANK] key to make the INT/EXB indicator go
dark, and press one of the [A]–[E] keys to select the bank.
To select combinations from an external bank EXB-A–EXB-
H
, press the [BANK] key to make the INT/EXB indicator
light, and press one of the [A]–[H] keys to select the bank.
All banks can be rewritten. Each bank contains 128 combina-
tions, providing a total of 1,664 combination programs.
If you have selected the “Program Select” (1.1–2c) edit
cell for a timbre 1–8 in the Prog page, BANK [A]–[D]
will switch the program banks for timbres 1–8.
Combi Select (Combination Select) [0...127: name]
Select a combination. Select this parameter, and use the
[INC], [DEC] keys, numeric keys [0]–[9], or the [VALUE]
dial to select a combination. You can also select combina-
tions by category, or using “10’s Hold.” (
☞
”Category,”
“Cat.HOLD,” “10’s HOLD”)
You can also select combinations by transmitting a
MIDI program change message from a connected exter-
nal MIDI device. (
☞ p.221)
Category [00...15: name]
This is the combination category display.
All combinations are organized into sixteen categories. You
can select a category, and then select from combinations that
belong to that category.
To select combinations by category, use “Cat.HOLD” and
Utility “Select by Category.” (
☞
PROG 1.1–1a)
To specify the category for a combination, use Utility
“Write Combination” (1.1–1d). To modify a category
name, use “Category Name Comb. 00–07, 08–15”
(GLOBAL 4.1–3/4).
COMBI PAGE MENU
Play 1.1: Play Select and play combinations. Select a
program for each timbre, and set sta-
tus, pan, and level. Select an arpeggio
pattern and make settings. (
☞
p.31)
P/M 2.1: Ed-Prog/Mix Select a program for each timbre, and
set pan and level. (Same as the 1.1:
Play parameters; can be edited from
either page.) (
☞
p.35)
Ctrl 2.2: Ed-Ctrl Controller settings. (
☞
p.36)
MOSS 2.3: Ed-MOSS Displayed if the separately sold EXB-
MOSS option is installed. Set EXB-
MOSS parameters. (
☞
p.36)
Prm1 3.1: Ed-Param1 MIDI, OSC, and Pitch settings for each
timbre. (
☞
p.36)
Prm1 3.2: Ed-Param2 Delay and scale settings for each tim-
bre. (
☞
p.38)
KeyZ 3.3: Ed-Key Zone Key zone settings for each timbre.
(
☞
p.39)
VelZ 3.4: Ed-Vel Zone Velocity zone settings for each timbre.
(
☞
p.40)
MIDI1 4.1: Ed-MIDI Filter1 MIDI message transmission/reception
filter settings for each timbre, such as
Prog Change and After Touch. (
☞
p.41)
MIDI2 4.2: Ed-MIDI Filter 2 Filter settings such as JS and Ribbon
Ctrl. (
☞
p.41)
MIDI3 4.3: Ed-MIDI Filter 3 Filter settings; Realtime Control Knob
(
☞
p.42)
MIDI4 4.4: Ed-MIDI Filter 4 Filter settings; SW, Other Ctrl Change
(
☞
p.42)
Arp 6.1: Ed-Arp Arpeggiator settings. (Same as the 1.1:
Play parameters; can be edited from
either page.) (
☞
p.43)
BUS 7.1: Ed-BUS Bus and master effect send level set-
tings for each timbre. (
☞
p.45)
IFX 7.2: Ed-InsertFX Insert effect routing, selection, and set-
tings. (
☞
p.47)
MFX 7.3: Ed-MasterFX Master effect selection and settings.
Master EQ settings. (
☞
p.48)
COMBI 1.1: Play
INT-A...INT-D (I-A...I-D) Preloaded combinations
INT-E (I-E) User combinations, EXB-MOSS com-
binations
EXB-A...EXB-H (E-A...E-H) User combinations, EXB-PCM series
combinations
1.1–1a
1.1–1b
1.1–1c 1.1–1d