manualshive.com logo in svg

Korg PA80, Руководство пользователя

Korg PA80 - мощный аранжировщик сенсорной клавиатуры, предлагающий богатое звуковое разнообразие и обширные функции управления. Для подробной информации о работе устройства загрузите сокращенное сервисное руководство бесплатно с manualshive.com.

Поделиться
Скачать
background image

11-8

Song Play operating mode

Page 3 - Mixer: FX send C/D

PA

G

E 3 - MIXER: FX 

S

END C/D

This page lets you set the level of the track’s direct (unef-
fected) signal going to the C and D Internal FX processors.

Note:

 You can access this page only while editing the Sequencer

2, and the “S2 FX Mode” parameter is set to “CD Mode” (see
page 11-11).

Use the TRACK SELECT button to switch from tracks 1-8 to
tracks 9-16.

Here is the edit procedure:

1

.  

Use the VOLUME/VALUE (A-H) buttons to select a
track.

2.

Use the F1-F4 buttons to select a parameter for that
track.

3.

Use the TEMPO/VALUE controls to change the parame-
ter’s value.

Parameters

000

No effect. Only the direct (uneffected) signal
goes to the outputs.

127

100% effect. The direct (uneffected) and
effected signals go to the outputs with the same
level.

PA

G

E 4 - FX: A/B 

S

ELECT

This page lets you select the A and B effects. Usually, the A
effect is a reverb, while the B effect is a modulating effect.
Effects A and B are usually reserved to Sequencer 1. You can,
however, create Songs by using all four effects in Song mode.
Depending on the status of the “S2 FX Mode” parameter, this
effect pair could be reserved to Sequencer 2, too (see page 11-
11).

Note:

 When playing back a Song that makes use of all four

effects (A-D), you can’t edit any effect parameter. These param-
eters appear greyed out in the display.

Note:

 When you stop the Song, or select a different Song, the

default effects are selected again. You can, however, stop the
Song, change the effects, then start the Song again. Edit the Song
in Song mode to permanently change the effects.

A, B

Effects assigned to the A and B effect processors. Usually, A is
the reverb, while B is the modulating effect (chorus, flanger,
delay…). For a list of the available effects, see “Effects” on
page 20-1.

ModTrk (Modulating Track)

Source track for modulating MIDI messages. You can modu-
late an effect parameter with a MIDI message generated by a
physical controller.

B>Asend (B>A 

S

end)

Amount of the B effect going back to the input of the A effect.

PA

G

E 4 - FX: C/D 

S

ELECT

This page lets you select the C and D effects. Usually, the C
effect is a reverb, while the D effect is a modulating effect.
Effects C and D are usually reserved to Sequencer 2 and the
Realtime tracks. You can, however, create Songs using all four
effects in Song mode. Depending on the status of the “S2 FX
Mode” parameter, Sequencer 2 might also use the A/B effect
pair (see page 11-11).

Note:

 When playing back a Song that makes use of all four

effects (A-D), you can’t edit any effect parameter. These param-
eters appear greyed out in the display.

Note:

 When you stop the Song, or select a different Song, the

default effects are selected again. You can, however, stop the
Song, change the effects, then start the Song again. Edit the Song
in Song mode to permanently change the effects.

C, D

Effects assigned to the C and D effect processors. Usually, C is
the reverb, while D is the modulating effect (chorus, flanger,
delay…). For a list of the available effects, see “Effects” on
page 20-1.

ModTrk (Modulating Track)

Source track for modulating MIDI messages. You can modu-
late an effect parameter with a MIDI message generated by a
physical controller.

D>Csend (D>C 

S

end)

Amount of the D effect going back to the input of the C
effect.

C:100 D:050 C:100 D:050

C:127 D:020 C:100 D:050

C:110 D:050 C:100 D:050

C:100 D:050 C:100 D:050

Mixer:FXSend

C:100 D:050 C:100 D:050

C:127 D:020 C:100 D:050

C:110 D:050 C:100 D:050

C:100 D:050 C:100 D:050

Mixer:FXSend

A:02        B:97

BigHall     MlwChrs

ModTrk:Up1  B>Asend:127

FX:A/B Select

C:02        D:97

BigHall     MlwChrs

ModTrk:Up1  D>Csend:127

FX:C/D Select

Содержание PA80





















































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для PA80

Sharkk iPad Mini Keyboard Owner'S Manual preview
iPad Mini Keyboard
Бренд: Sharkk Страницы: 22
Mr Handsfree Blue iCover User Manual preview
Blue iCover
Бренд: Mr Handsfree Страницы: 15
XUMA CKSE-112B User Manual preview
CKSE-112B
Бренд: XUMA Страницы: 8
Saab 32000574 Installation Instructions Manual preview
32000574
Бренд: Saab Страницы: 9
Safe Fleet RVS-218629 Instruction Manual preview
RVS-218629
Бренд: Safe Fleet Страницы: 28
Radio Shack LK-1500 Owner'S Manual preview
LK-1500
Бренд: Radio Shack Страницы: 80
PNI ESCORT P03 B User Manual preview
ESCORT P03 B
Бренд: PNI Страницы: 32
Akai Professional LPK25 Service Manual preview
Professional LPK25
Бренд: Akai Страницы: 19
perixx PERIBOARD User Manual preview
PERIBOARD
Бренд: perixx Страницы: 21
CAVE K20 Quick Setup Manual preview
K20
Бренд: CAVE Страницы: 4
Accuratus KYBAC540-USBHY Datasheet preview
KYBAC540-USBHY
Бренд: Accuratus Страницы: 1
Accuratus HKB260UBKLC Specification preview
HKB260UBKLC
Бренд: Accuratus Страницы: 1
Misfit SH2 Quick Start Manual preview
SH2
Бренд: Misfit Страницы: 13
Shintaro SH-KEYMCE User Manual preview
SH-KEYMCE
Бренд: Shintaro Страницы: 7
Sela iwerkz Getting Started preview
iwerkz
Бренд: Sela Страницы: 2
perixx PERIBOARD-535 User Manual preview
PERIBOARD-535
Бренд: perixx Страницы: 19
Trebs CC-105 Operation Manual preview
CC-105
Бренд: Trebs Страницы: 32
Cooper Cases NoteKee F8S Instructions Manual preview
NoteKee F8S
Бренд: Cooper Cases Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды