Korg PA80, Руководство пользователя, Страница: 114 / 308

13-12 Song operating mode
Page 14 - Track: Easy edit
PA G E 1 4 - TRACK: EA S Y EDIT
In this page you can edit the main parameters of the Pro-
grams assigned to each track.
Note: All values are relative to the value of the original Pro-
gram.
You can also change the volume for each class of Drums and
Percussions, if the selected track is set in Drum mode (see
below “Page 15 - Track: Mode”).
Use the TRACK SELECT button to switch between Song
tracks 1-8, Song tracks 9-16, and back again.
Here is the edit procedure:
1 .
Use the VOLUME/VALUE (A-H) buttons to select a
track.
2. Use the F1-F4 buttons to select a sound parameter, or its
value. (For the Drum and Percussion tracks, see below
the “Drum tracks” section).
3. Use the TEMPO/VALUE controls to change the sound
parameter or its value.
Parameters
Attack Attack time. This is the time during which the
sound goes from zero (at the moment when
you strike a key) to it’s maximum level.
Decay Decay time. Time to go from the final Attack
level to the beginning of the Release.
Release Release time. This is the time during which the
sound goes from the sustaining (or Decay)
phase, to zero. The Release is triggered by
releasing a key.
Cutoff Filter cutoff. This sets the sound brightness.
Resonance Use the Filter Resonance to define the width of
the frequency range affected by the Filter.
Vibrato Rate Speed of the Vibrato.
Vibrato Depth
Intensity of the Vibrato.
Vibrato Delay
Delay time before the Vibrato begins, after the
sound starts.
Drum tracks
When a track is set in Drum Mode (like the Drum and Per-
cussion tracks), you can adjust the volume for each of the
Drum and Percussion categories.
Kick V
Kick drums volume.
Snare V Snare drums volume.
Tom V Toms volume.
HiHat V Hi-Hat volume.
CymbalV Ride, Crash and other cymbals volume.
Percus1V “Classic” percussion set volume.
Percus2V “Ethnic” percussion set volume.
SFX V Special effects volume.
Reset
You can reset the parameters’ value by keeping the SHIFT
button pressed, while pressing the selected track VOLUME/
VALUE button. When you press the above combination, the
Reset window appears:
Press ENTER/YES to reset the currently selected track. Keep
SHIFT pressed, and press ENTER/YES, to reset all tracks.
Press EXIT/NO to abort and leave all parameters unchanged.
Attack:0 Attack:0
Attack:0 Attack:0
Attack:0 Attack:0
Attack:0 Attack:0
Track:Easy Edit
Attack:0 Attack:0
Attack:0 Attack:0
Attack:0 Attack:0
Attack:0 Attack:0
Track:Easy Edit
RESET NO=Cancel
YES=Trk SHFT+YES=All